Failure of oil-water separator

Regulator fault with the "valve failure" identical.
Lubricator fault phenomenon: no drop of oil deposited on the bottom of the oil cup water, oil cup seal failures. Concrete batching plant does not drip, check the inlet gas flow rate is below the fog flow, leaks, clogged fuel adjustment needle, etc.; if the oil cup bottom sediment moisture, should be immediately removed; when seal is damaged, should be replaced.Leaking pipe joints and hose rupture up to judge the sound leak from the site, should be promptly repaired or replaced; if there is accumulating condensate pipeline, it shall promptly drained, is characterized by condensed water in batch mixing plant winter, easy to knot Ice and clogging gas.
Compressed air processing components (triplets) faults are: oil and water separator failure, regulator and lubricator failure.
Failure of oil-water separator is divided into, filter clogging, breakage, drain valve moving parts moving parts is not flexible and so on. Work should always clean the filter, remove sewage and impurities inside the oil.